www.3500HD.com
0
  • December 16, 2017, 02:20:00 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:


Welcome to the 3500HD.com forum created October 2009

THIS IS THE PLACE TO LIST AND SELL YOUR TRUCKS AND PARTS FREE!
Home of all dually trucks with the GMC/Chevy 3500HD series truck a point of interest
By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please register for an account above!
You can appreciate the “beef” of the GMC/Chevy 3500HD trucks, a stripped rolling 3500HD chassis weighs more than a running C1500!
When posting on this site you won't have to explain what the 3500HD Beast is! ie 19.5 wheels, straight axle, 10 bolt wheels, 15000lbs GVW etc
 We are based in the U.S. If you are not from the U.S. or Canada (all IP addresses checked) you will be rejected. If you are a legit overseas applicant, contact me via email: borderdrop@yahoo.com
WILL BE UNDER CONSTRUCTION  & TRYING OUT A FEW DIFFERENT LOOKS - December 2017!!!!!!!

Author Topic: 2000 3500HD project arrived  (Read 1601 times)

SlowBoat

  • Single Axle Driver
  • *
  • Posts: 20
2000 3500HD project arrived
« on: September 09, 2015, 11:02:40 PM »

Got my 2000 3500HD delivered on Labor Day while I was out of town.  A pleasant surprise to come home to.  6.5L with its 5 speed laying in the bed, along with a portable air compressor.  Plan on pulling the service bed for access to the chassis first and then checking it all out to see where I want to start working.
Logged
2001 Chevrolet 3500HD 159.5 WB, 8.1L, 5spd, 4.63
2000 GMC Sierra 3500HD 159.5 WB, 6.5L, 5spd, 5.13
1996 Chevrolet 3500HD 159.5 WB, 6.5L, AT
1995 Chevrolet 30HD Box Van, Bad gas engine, AT
1997 GMC Sierra 3500 CC, DRW, 6.5L, AT, 3.73

ED-NY

  • Administrator
  • 3500HD Hero
  • *****
  • Posts: 943
Re: 2000 3500HD project arrived
« Reply #1 on: September 10, 2015, 10:10:26 AM »

Solid looking body..
Logged

SlowBoat

  • Single Axle Driver
  • *
  • Posts: 20
Re: 2000 3500HD project arrived
« Reply #2 on: September 10, 2015, 08:56:58 PM »

Body is solid and straight.  Drivers side of seat is shot and will need replaced.  The interior will get stripped out and thoroughly cleaned after I've done a good mechanical checkout.  The clutch and pressure plate are in a side box and the flywheel has surface rust on it.  I figured with the age of the truck and the 178K miles they just wrote it off.  The tool body is straight, the doors all work and latch fine, just the rear step bumper shows any sign of damage.  I haven't had the time to check out the compressor yet, other than determining that it is a NAPA unit rated for 175 PSI.  If it doesn't pour down rain tomorrow, I'll put some batteries in it and see if it starts.
Logged
2001 Chevrolet 3500HD 159.5 WB, 8.1L, 5spd, 4.63
2000 GMC Sierra 3500HD 159.5 WB, 6.5L, 5spd, 5.13
1996 Chevrolet 3500HD 159.5 WB, 6.5L, AT
1995 Chevrolet 30HD Box Van, Bad gas engine, AT
1997 GMC Sierra 3500 CC, DRW, 6.5L, AT, 3.73

KODIAK

  • 3500HD Hero
  • *****
  • Posts: 407
Re: 2000 3500HD project arrived
« Reply #3 on: September 12, 2015, 06:22:17 PM »

Looks good
Logged