Pages: [1]
  Print  
Author Topic: Wanted 92-93 Chevy/GMC truck fan shroud  (Read 153 times)
ED-NY
Administrator
3500HD Hero
*****
Age: 66
Location: Champlain, NY
Posts: 901



« on: June 09, 2017, 06:21:09 AM »

Need the upper/lower fan cooling shroud from a 1992-1993 Chevy/GMC full size truck, but could get away with just the bottom half.

 Upper part # 15739593, 15735600 or "15622652", missing the lower half.

 Width is approx 33", depth 10.5"

I have a tune port SBC in my 3500HD and this shroud allows me to use the stock length water pump and protects the upper TPI radiator hose from the fan blade. Don't want to install an electric fan.

Have a pic of the current setup, had to install a spacer to push the fan blade forward so it clears the upper hose and centers on the shroud so the air is pushed sideways away from the engine


* three.JPG (124.64 KB, 1500x1125 - viewed 2 times.)

* IMG_20170606_144029.jpg (1832.64 KB, 1944x2592 - viewed 4 times.)

* one.JPG (82.4 KB, 1500x1125 - viewed 4 times.)

* tpi.JPG (875.27 KB, 1824x1368 - viewed 6 times.)
« Last Edit: June 10, 2017, 06:03:27 AM by ED-NY » Logged
ROAD
Single Axle Driver
*
Location: NORTHERN,AZ
Posts: 4


« Reply #1 on: June 09, 2017, 10:21:37 AM »

Hey ED i got a top and bottom one off a 96 3500 srw that measures 11.5 wide in excellent shape.
Logged
ED-NY
Administrator
3500HD Hero
*****
Age: 66
Location: Champlain, NY
Posts: 901



« Reply #2 on: June 09, 2017, 12:45:00 PM »

ROAD

I have been through a bunch of "close" shrouds, the only one that will fit is the one with part numbers noted. Attached another picture.  I ran the part numbers to identify it as a 92-93 shroud, parted many trucks over the years so I'm not sure which truck the top was removed from.

Thanks anyway


* top.jpg (623.92 KB, 1296x972 - viewed 4 times.)
Logged
ROAD
Single Axle Driver
*
Location: NORTHERN,AZ
Posts: 4


« Reply #3 on: June 09, 2017, 04:37:25 PM »

ED, is that a diesel shroud that you are lookin for Huh.
Logged
ED-NY
Administrator
3500HD Hero
*****
Age: 66
Location: Champlain, NY
Posts: 901



« Reply #4 on: June 09, 2017, 06:24:39 PM »

ED, is that a diesel shroud that you are lookin for Huh.

Really don't know, I parted out several trucks over the years and stacked up the fan shrouds.  I had several in a pile and accidentally kicked one and it shattered...guess which one..yep the only one in the pile I needed. I have 2 and 3's of the others!

When I installed the TPI engine I tried several shrouds to determine the best one, the best fitting was the 15622652 (upper) but I don't have the lower section. It's obviously from a V8 because of the width...that's all I know.
« Last Edit: June 10, 2017, 06:02:14 AM by ED-NY » Logged
ROAD
Single Axle Driver
*
Location: NORTHERN,AZ
Posts: 4


« Reply #5 on: June 09, 2017, 06:32:30 PM »

ED the only one that I have seen that is a little different is one from a 91, 92 c3500 c@c with a 5.7 with a brass tank radiator in it , good luck.
Logged
ED-NY
Administrator
3500HD Hero
*****
Age: 66
Location: Champlain, NY
Posts: 901



« Reply #6 on: June 09, 2017, 06:42:26 PM »

A couple more pics


* shroudbrack (1).jpg (377.71 KB, 1296x972 - viewed 1 times.)

* shroudrouting.jpg (396.63 KB, 1296x972 - viewed 2 times.)
Logged
ED-NY
Administrator
3500HD Hero
*****
Age: 66
Location: Champlain, NY
Posts: 901



« Reply #7 on: June 09, 2017, 06:44:43 PM »

ED the only one that I have seen that is a little different is one from a 91, 92 c3500 c@c with a 5.7 with a brass tank radiator in it , good luck.


I have a couple of diesel brass radiators in the barn ..this could be related.

THANKS FOR LOOKING!
Logged
Raymo
Global Moderator
3500HD Driver
*****
Age: 29
Location: Port Huron Area, MI
Posts: 379



« Reply #8 on: June 15, 2017, 04:16:38 PM »

Have you tried digging on rock auto's sight? I bought upper and lowers for my plow truck for dirt cheap. May have the right cross to what you're looking for?
Logged

'94 3500-HD, Cummins, Getrag, NP205. Shortend rear frame with a Pickup Bed. Dana 60 front, stock 80 rear.

'03 2500-HD 8.1 and Allison
ED-NY
Administrator
3500HD Hero
*****
Age: 66
Location: Champlain, NY
Posts: 901



« Reply #9 on: June 16, 2017, 05:10:07 PM »

Have you tried digging on rock auto's sight? I bought upper and lowers for my plow truck for dirt cheap. May have the right cross to what you're looking for?

Gave it a try...no luck.
Logged
Pages: [1]
  Print  
 
Jump to:  


LINK SECTION - DON'T SEE DISTRACTING ADVERTISING PASTED ALL OVER THIS FORUM? THAT'S BECAUSE THIS IS A REFERENCE SITE.
THIS IS OUR FREE ADVERTISING AREA... FEEL FREE TO SUGGEST ANY LINKS (yours included).


DURAMAX SWAP How To Manual
GMT400 FORUM
FIND THE LOWEST FUEL PRICES IN YOUR AREA
COMPNINE Total VIN Decoder
DeCodeThis VIN Decoder
CHEVY 348/409 (W) Engine Forum
Chevy Thunder (Great SBC Fuel Injection Reference Site)
BCC Bin Look Up
Classic Shop Talk
PERFORMANCE DYNAMICS SPEED SHOP (EFI & Misc AN Fittings)
Rickson Wheel Manufacturing
Vintage Chevrolet Club of America
THE RUSTY BOWTIE FORUM
1991-2002 Chevy/GMC 3500HD History - Specifications
STEP VAN PARTS
METAL MEET FORUM
GMT400 VIN DECODING by someotherguy
C/K 3500HD Wikipedia Link
THE TRUCK STOP
THE DIESEL GARAGE
FEDERAL TRADE COMMISSION SPAM INFO SITE
CRAIGSLIST SEARCH TEMPEST
CLASSIFIED SEARCH
GSA AUCTIONS
GOV DEALS AUCTIONS
CLIPS & FASTENERS
NATIONAL DO NOT CALL REGISTRY
AUCTION TIME
SD Truck Springs - Leaf Springs, Helper Springs, and Suspension Air Bags
AUCTIONS INTERNATIONAL
TORQUE KING 4X4
TRUCK FRAME BUILDERS
TEAM 208 MOTORSPORTS Custom Wiring, Tuning, EFI, Diesel, Gas

Breen by Runic © 2009
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
XHTML | CSS