THIS IS THE PLACE TO LIST AND SELL YOUR TRUCKS AND PARTS FREE!

Home of all dually trucks with the GMC/Chevy 3500HD series truck a point of interest.

By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please register for an account above!

You can appreciate the “beef” of the GMC/Chevy 3500HD trucks, a stripped rolling 3500HD chassis weighs more than a running C1500!

When posting on this site you won't have to explain what the 3500HD Beast is! ie 19.5 wheels, straight axle, 10 bolt wheels, 15000lbs GVW, 4 Wheel Disc Brakes etc

We are based in the U.S. If you are not from the U.S. or Canada (all IP addresses checked) you will be rejected. If you are a legit overseas applicant, contact me via email: borderdrop@yahoo.com


Welcome to the 3500HD.com forum created October 2009

Author Topic: Anyone actually located gears for a 11" Dana 80  (Read 103 times)

ED-NY

  • Administrator
  • 3500HD Hero
  • *****
  • Posts: 1063
  • Age: 68
  • Location: Champlain, NY
Anyone actually located gears for a 11" Dana 80
« on: May 09, 2019, 10:17:09 AM »
RE: 1995 3500HD

Anyone actually locate ring/pinion gears other than 5.13 & 4.63 for a Dana Spicer 80?

RPF207

  • 3500HD Driver
  • ****
  • Posts: 243
  • Age: 30
  • Location: Maine
Re: Anyone actually located gears for a 11" Dana 80
« Reply #1 on: May 10, 2019, 11:44:22 AM »
https://eastcoastgearsupply.com/c-284525-gears-install-kits-carriers-spider-gears-dana-spicer-gears-dana-80-d80-dana-80-ring-and-pinions.html

I like this site a lot. Easy to use and lots of info. I believe GM Dana 80s have 11.25” 37 spline rears. Always best to verify first and once you select a gear on this site it will specify those specs
1999 chevy HD 4x4 135.5" 6.5 nv4500 bw4470 Dana 70 HP 10 lug front

Due to recent budget cuts the light at the end of the tunnel has been turned off

ED-NY

  • Administrator
  • 3500HD Hero
  • *****
  • Posts: 1063
  • Age: 68
  • Location: Champlain, NY
Re: Anyone actually located gears for a 11" Dana 80
« Reply #2 on: May 10, 2019, 03:05:33 PM »
https://eastcoastgearsupply.com/c-284525-gears-install-kits-carriers-spider-gears-dana-spicer-gears-dana-80-d80-dana-80-ring-and-pinions.html

I like this site a lot. Easy to use and lots of info. I believe GM Dana 80s have 11.25” 37 spline rears. Always best to verify first and once you select a gear on this site it will specify those specs

Thanks..they have the best prices that I have seen. Noted their link below.
« Last Edit: May 10, 2019, 03:13:11 PM by ED-NY »

RPF207

  • 3500HD Driver
  • ****
  • Posts: 243
  • Age: 30
  • Location: Maine
Re: Anyone actually located gears for a 11" Dana 80
« Reply #3 on: May 11, 2019, 07:28:52 AM »
Cool, also it’s best to identify your differentials carrier break before purchasing a set of gears.
1999 chevy HD 4x4 135.5" 6.5 nv4500 bw4470 Dana 70 HP 10 lug front

Due to recent budget cuts the light at the end of the tunnel has been turned off

 


LINK SECTION - FEEL FREE TO SUGGEST ANY LINKS (YOURS INCLUDED).



DIESEL HUB
DIESEL PLACE
EAST COAST GEAR SUPPLY
3500HD King Pin Replacement
4BT and Diesel Swaps
King Pin Tech Tip pdf
JEEP ENGINE GUIDE pdf MOPAR
KING PIN THREAD
JEEP WRANGLER WIRING DIAGRAMS
MILLER TIG Welding Calculator
TBI CHIPS.COM
VINTAGE CHEVY/GM FORUM