Author Topic: dana 80 fluid level (Read 1059 times)

remingtongoose77 · « **on:** March 07, 2018, 08:14:14 PM »

hello all,

I am putting my truck back together, and since I bought it and took it apart I have no real life experience with it, I have many questions.

when you are servicing the rear gear, do you fill to the plug level on the cover? I machined a billet spacer that is 2.5" thick. This puts the stock cover off the differential face 2.5 inches to allow more fluid and i thought the factory fill was flush to the pipe plug in the stock cover.

Any thoughts?

thanks men,

LW

ED-NY · « **Reply #1 on:** March 07, 2018, 10:05:30 PM »

I'm sure at the plug level is the logical fill position...that's what I have always done. On my S10 daily driver I installed a cover plug at the same height as the 3rd member fill plug...just easier to fill.

Author Topic: dana 80 fluid level (Read 1059 times)

remingtongoose77

dana 80 fluid level

ED-NY

Re: dana 80 fluid level